Archive for August, 2007
Parts Pickguard
Parts Pickguard

Can i replace a p90 with a single coil?
first off, I already know a p90 is a single coil.
I had a Fender Jag-Stang that was in love with mostly because of the single coil and the humbucker layout, perfect mix to me.
I hated that I was stuck playing a right handed guitar, being that im left handed and could not hit all the frets. So I sold it.
Now I have an SX SJM-S62 with a p90s in the neck and bridge. I already know that I can get a humbucker to replace the p90 in the bridge, but can I put a regular old single coil in the neck?
I figure its got enough space to fit, and you would just have to mount it to the pickguard, and put a piece of wood or something underneath to support it. Then im gonna have it wired up like a Jaguar, I would expect that to be the most expensive part, because of the routing and wiring.
I dont need you to tell me that its going to be expensive, moneys not an object. Just tell me that its possible.
Of course its possible…. the wiring is relatively straightforward, as wiring goes. Remember, Ibanez wiring is HSH, so its not like this is by any means an unusual request. “Fat Strats” have HSS pup placement, too, so there’s plenty of precedent for mixing single-coils and humbuckers. Me, I just hate the hum…. I suppose I could try some noiseless single-coils, ie Seymour Duncan Hot Rails or Fender Lace Sensors or an active single-coil….
If you’ve used the single-coil/humbucker mix before, you’ll know that its very easy to have an imbalance volume-wise between single-coils and humbuckers… of course, that’s what volume knobs are for, if you have a separate one for your bridge, that is.
If you are concerned about your tech not being familiar with the wiring (which I would find highly unlikely), you might try bringing them the following link – I think its what you’re looking for?
If not, all I did was google “jag stang wiring diagram”…. it looks like a number of images popped up too, one of those might help as well.
Good luck!
Saul
|
|
1960′S Conrad electric guitar parts: pickups pickguard $99.99 |
|
|
INLAY ROSEWOOD PICKGUARD GUITAR PARTS LUTHIER GP599 $7.00 |
|
|
Super-strat 13 Sound parts, pickguard Kit-Tortoise F42 $28.00 |
|
|
Guitar Parts Pickguard W/B/W Fits Les Paul $19.95 |
|
|
Archtop Guitar Part-Rosewood Pickguard w/MOP Inlay (5) $0.99 |
|
|
Archtop Guitar Part-Rosewood Pickguard w/MOP Inlay(588) $0.99 |
|
|
Guitar Part – Rosewood Pickguard w/ MOP Art Inlay (521) $0.99 |
|
|
Archtop Guitar Part-Rosewood Pickguard w/MOP Inlay (3) $0.99 |
|
|
STRATOCASTER PICKGUARD SETS. LUTHIERS PROJECT PARTS $39.95 |
|
|
INLAY MEXICO ABALONE EBONY PICKGUARD GUITAR PARTS GP565 $9.00 |
|
|
Guitar Parts Pickguard Diamond Plate Fits FENDER $39.99 |
|
|
Guitar Part – Rosewood Pickguard w/ MOP Art Inlay (484) $0.99 |
|
|
Archtop Guitar Part-Rosewood Pickguard w/MOP Inlay (2) $0.99 |
|
|
Guitar Parts Pickguard W/B/W Fits Les Paul $21.00 |
|
|
Guitar Part – Rosewood Pickguard w/ MOP Art Inlay (515) $0.99 |
|
|
BLACK PICKGUARD FITS FENDER JAZZ BASS GUITAR NEW PARTS $9.99 |
|
|
GOLD Pickguard Hardware for Strat Project, Parts $9.99 |
|
|
NICKLE- Pickguard Bracket 4 LP, 335, etc, Parts Project $5.99 |
|
|
SHORT – BLACK Pickguard For Gibson 335, Parts Project $19.99 |
|
|
Guitar project Body Free PGR Free Pickguard & Parts $49.90 |
